Standard specifications VF-S15 ¹)

VFS15S

1-ph. 240 V

Applicable motor [kW]

0,25 ….. 2,2 kW

Output current [A]

1,5 ….. 11,0 A

Capacity [kVA]

0,6 ….. 4,2 kVA

Power supply

1-ph. 200 V ... 240 V, +10% ... -15% - 50/60 Hz

Rated output voltage

50 V … 300 V, maximum output voltage

VFS15

3-ph.400 V

Applicable motor [kW]

0,37 ….. 15,0 kW

Output current [A]

1,5 ….. 33,0 A

Capacity [kVA]

1,1 ….. 25,1 kVA

Power supply

380 V … 500 V, +10% ... -15% - 50/60 Hz

Rated output voltage

50 V … 600 V, maximum output voltage

VFS15

3-ph.240 V

Applicable motor [kW]

0,4 ….. 15,0 kW

Output current [A]

3,3 ….. 66,0 A

Capacity [kVA]

1,3 ….. 25,1 kVA

Power supply

3-ph. 200 V … 240 V, +10% ... -15% - 50/60 Hz

Rated output voltage

50 V … 300 V, maximum output voltage

Dual Rating (M-square)

When limited to 120% overload for 60 seconds instead of 150% set a higher performance class motor with the same power of the inverter

Output frequency range

0,1 … 500Hz

Overload capability

150% (120% at M= square line) for 60 s, 200% for 0,5 s

Integrated EMC Filter

1-ph. 240 V, 3-ph. 500 V EMC filter (IEC61800-3 category C2)

V/f control methods

V/f constant torque (linear), V/f variable torque (square), automatic torque boost, sensorless vector control, energy saving control, dynamic energy saving control, control with rotor position detection for PM motors (not at model VF-S15PL-W), 7 point V/F line

Braking unit

integrated, external braking resistor lockable

Inputs digital

6(8) ²): sink / source logic switchable, control voltage 24 V DC int / ext. pulse input 10 ... 20 kpps; Fixed assigned: 1 x STO (not at model VF-S15PL-W)

Inputs analog

3(1) ²): VIA: 0 ... 10 V, VIB: -10(0) ... +10 V, VIC: (0) 4... 20 mA

Outputs

2x Relays outputs, 1 potential-free digital or pulse output 10 ... 20 kpps, 1 analog output 0 ... 10 V or 4(0) ... 20 mA

Fieldbus and communication

integrated: Modbus® RTU, TOSHIBA RS-485 optional: PROFIBUS®DP, CANopen®, PROFINET® (in work), EtherNet/IP™, EtherCAT®, Modbus®TCP, DeviceNet™, CC-LINK

Protection functions

PTC-evaluation, overtorque, minimum current, over current, Overload, over temperature, phase failure, earth fault, winding short et al.

Safety functions

STO / SS1 according to IEC / EN61800-5-2

Protection class

IP20

Cooling method

1-ph. 240 V & 3-ph. 240 V self-cooling; 3-ph. 400 V with fan

Ambient temperature

Interior, no direct sunlight, no corrosive gas, no explosive or flammable gases, no oil mist, no dust; ambient temp. -10 .. +60°C; 5 .. 95 % relative humidity (condensation-free) up to 3000 m³); max. vibration 5.9 m / s² (10 ... 55 Hz)

Certification

CE, UL, CSA